Ouverz Notre APP!

Profitez du Meilleur Prix.

Ouvrez APP
Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY
Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY
Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY
1/1

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY - Blanc

Voir La Traduction
264.14د.م.
27.34
Économisez un 0 supplémentaire pour utiliser l'application
326 Avis

Coupon:

Promotion:

Prise en charge du paiement à la livraison

Entrepôt et Frais

Sélectionnez
CN-099:Expédier entre: Sep 23 - Sep 25

Options du Produit

Sélectionnez
Blanc
Visiter le Magasin

Avis (326)

Mario Almeida
Sep 05,2017
Great print quality, Print temperate mentioned on the roll is 190 to 230, nowhere in this range you have good quality even at 190 the filament is boiling, a good result I could get on my Anet A8 with E3Dv6 with this filament is from 160 to 175. I stayed on 170C and bed temperature at 35C and have a really good result. I printer a vase in vase mode at 0.35 mm layer height, a speed at 45 mm/s with very good print quality.
Voir Plus

Description

Anet Filament de Matériau en PLA 340m 1,75mm d'impression 3D pour Projet DIY

Caractéristiques Principales:
● Fabriqué en matériau PLA de bonne qualité
● Compatible avec la plupart des imprimantes 3D
●  Il est plus fort et plus rigide que l'ABS, et en général, les objets  imprimés auront un aspect et une sensation plus brillants par rapport à l'ABS
● Le PLA est un type commun de filaments  biodégradables dérivé de ressources renouvelables, telles que l'amidon  de maïs, les racines de tapioca, les chips ou l'amidon ou la canne à  sucre
● Le PLA permet une vitesse d'impression plus  élevée, un placement plus précis du matériau avec un refroidissement  approprié et des hauteurs de construction plus minces, car il présente  moins de résistance du plastique sortant de la buse
● Il sent comme un parfum de coton lorsqu'il est utilisé
● Plusieurs couleurs pour la sélection
● Précision dimensionnelle dans plus ou moins 0,02 mm

Spécification

Spécification

Marque: Anet
Matières: PLA
Diamètre: 1,75mm
Longueur: 340m
Couleur: Argent

Général

Particularités: Matériel de Filament d'Impression 3D

Spécification

Poids du produit: 1,3140 kg

Liste d'emballage

Liste d'emballage: 1 x Matériel de Filament en PLA d'Impression 3D

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY- BlancAnet Filament en PLA d'Impression 3D 340m 1,75mm DIY- BlancAnet Filament en PLA d'Impression 3D 340m 1,75mm DIY- BlancAnet Filament en PLA d'Impression 3D 340m 1,75mm DIY- Blanc

Clause de non-responsabilité:
Nous n'acceptons pas aucune responsabilité ou obligation pour l’utilisation abusive de ce produit ou tous autres produits. Tous nos produits sont sévèrement testés pour conformer aux normes QC rigoureuses et strictes. Pour certains produits (par exemple les jouets, couteaux, etc.), nous recommandons une supervision appropriée comme nous ne pouvons pas être tenus responsables pour des abus ou des accidents.

Produits Recommandés

Produits Sponsorisés

Bonus du Nouveau Membre: Coupon de $50
264.14د.م.

Anet Filament en PLA d'Impression 3D 340m 1,75mm DIY

Couleur

Quantité - +
Versements: choisir
loading...
loading...
Annuler
loading...
loading...
loading...

Avis

4.76 *****
  • 260
  • 61
  • 1
  • 1
  • 3
  • Tout ( 326 )
  • ( 132 )
  • ( 38 )
Mario Almeida
Sep 05,2017
Great print quality, Print temperate mentioned on the roll is 190 to 230, nowhere in this range you have good quality even at 190 the filament is boiling, a good result I could get on my Anet A8 with E3Dv6 with this filament is from 160 to 175. I stayed on 170C and bed temperature at 35C and have a really good result. I printer a vase in vase mode at 0.35 mm layer height, a speed at 45 mm/s with very good print quality.
Suggestion:
No proper packing, it was not airtight.
bob
Apr 20,2019
Package was ok.Not bad Not perfect. But my printer nozzle get stuck when i start to use this flament. i dont know if this issue because of this kind of flament or not.TRAmbalaj gayet güzel yapılmıştı. Herhangi bir deformasyon ile karşılaşmadım. Fakat flamenti kullandığımdan beri püskürtme nozülü sürekli tıkanıyor. Bazı kullanıcı arkadaşlarım tıkanma olayının flamentten kaynaklandıgını dile getirdi.Dec 26,2018
Fernando
Jan 13,2019
É um açucar. Muito bom, o ponto de fusão do filamente é entre 195 a 200 °C, com a minha ender3 fui capaz de fazer miniaturas como as que aparecem nas fotos. Fica praticamente transparente se for uma só camada plana, claro que além disso vai ficando fosco, Mas é próprio do material. O efeito é muito bom e nas miniaturas até da pra ver as engrenagens por dentro. Certamente comprarei mais no futuro.
offtherails2010
Mar 11,2018
FREE Spool that Gearbest Gave with my first 3D Printer, which was an offer Great to make test prints with or anything that doesnt need to see the light of day due to the aweful print quality lol Cant really say anything else good for this lol
Suggestion:
AIR Bubbles in filament, 1.75mm diameter but theres like 20 bubbles in every 10cm (100mm) of fimament !! This really screws up the prints, but with some sanding and filing, the prints can be usable, as long as they are NOT display purpose items haha Apart from the bubbles, theres nothing else wrong with this 1KG Spool, cant complain too much as it was free, and i can see why - how bad would it be if one actually PAID for this,,, i now get all my filament from HobbyKing, but should i need another cheap as chips 3D Printer, Gearbest really do have the best prices, jussst be warned that you may have to wait upto 45 days or LONGER for your 3D Printer as i did,, 45 days was really bad.. Some photo's attached showing how bad the quality is with this blue PLA with the awful air bubbles in the filament ccompared to some Black ABS prints made with the same Anet A8 which i bought from HobbyKing
Javier Martin
Oct 15,2016
Anet brand was suggested to me when I bought my prusa i3 here in gearbest. I have no problem, no clog, no breaks... Perfect, 100% advisable. Era el filamento que me recomendaba la página para mi prusa i3, totalmente recomendable, sin atasco ni roturas.
Suggestion:
None Ninguno
beyondreality
Jul 31,2018
Very good PLA. As a beginner, I did not notice any problems with this PLA. Has already printed a few details, everything turned out from the first time. The only thing in the beginning is need to calibrate the hot table, only once. Then later are no problems.
Suggestion:
Very good PLA! Recomend!
Poe
Mar 28,2017
Measured and tested, nothing wrong with it. It came in a bag under vacuum with a silica gel minibag to keep the moisture low, good thing. I've been printing with it for one week now and nothing wrong
Suggestion:
Nothing wrong with it yet.
Selim1905
Dec 26,2018
Package was ok.Not bad Not perfect. But my printer nozzle get stuck when i start to use this flament. i dont know if this issue because of this kind of flament or not.TRAmbalaj gayet güzel yapılmıştı. Herhangi bir deformasyon ile karşılaşmadım. Fakat flamenti kullandığımdan beri püskürtme nozülü sürekli tıkanıyor. Bazı kullanıcı arkadaşlarım tıkanma olayının flamentten kaynaklandıgını dile getirdi.
Nie
Jul 19,2018
i just love everything about this product. not only it is created from great materials, but also it works as intended. the delivery time was very fast and customer support was perfect. i would recoment it to everyone
Suggestion:
i just love everything about this product. not only it is created from great materials, but also it works as intended. the delivery time was very fast and customer support was perfect. i would recoment it to everyone
Eleonora Scarfo`
Dec 10,2017
It's vacuum sealed with silica gel so it stay dry until you open it. Cohesion between layers is very good , i print it at 195 C without problems. Good filament for DECORATIVE things
Suggestion:
Anet PLA BLACK isn't a high precision filament , roundness do not respect technical specification so you cannot calibrate extrusion width. This is a PROBLEM if you have to print ACCURATE THINGS
Voir Plus
Voir Plus
Voir Plus